Description

With performance wheels and tires gaining popularity, you need a machine that can step up to the job at hand. The RX950 by Ranger was designed for unparalleled safety and productivity representing a dramatic leap forward in tire changing technology. The rim clamping and bead breaking operations on the RX950 assure that today’s alloy wheels are undamaged. The RX950 features a swing arm tower and adjustable tool head design combined with a large 1-1/2 HP motor for superior performance. For added convenience, we added a "geometric" table design, powerful "jet-blast" inflation system and a generous 8-gallon surge tank. Plus the RX950 handles both standard passenger wheels and light truck wheels as large as 50" diameter. After sending your "old" tire changer out to pasture you'll quickly realize one important fact. Change is good.

Shipping Details

It is the buyer's responsibility to unload the freight at their location. BendPak will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck. Contact your BendPak dealer for shipping details.

Features

• 8 Gallon Surge Tank
• Traveling Drop-Center Hold Down Devise
• Inflation Gauge
• Dual-Setting Bead Breaker
• Both Standard Passenger and Light Truck
• Powerful High-Torque Motor
• Inflation Restraint Device
• Large Storage Trays
• Powerful "Jet-Blast" Bead Sealer
• Oversize Lube Bucket Storage

Specifications

• Type of wheels - Aluminum, Special Alloys, Steel
• Type of Drive System - Electric & Air
• Motor - 1-1/2 HP (110-220 VAC)
• Air Requirement - 110-175 PSI (8-10 BAR)
• Wheel Clamping Method - 4 Clamps - Internal / External
• Table Clamping System - Dual Pneumatic Cylinders
• Bead Breaking System - Dual Positional Pneumatic Blade
• Inflation Gauge - Standard
• Water Filter - Standard
• Oiler / Lubricator - Standard
• Air Regulator - Standard
• Breaker Bar - Standard
• Soap / Lubricator Bucket - Standard
• Brush - Standard
• Cross Cut Table Top - Standard
• Powerful "Jet-Blast" Bead Seating System - Standard
• Internal Rim Clamping Capacity - 12-1/2" – 22" (317 mm – 559 mm)
• External Rim Clamping Capacity - 11-1/2" – 21" (292 mm – 533 mm)
• Bead Breaker Capacity - 3" – 14" (76 mm – 355 mm)
• Tire Width Capacity / Table - 14" (317 mm)
• Maximum Tire Diameter - 50" (1270 mm)

*The design, material and specifications are subject to change without notice.

Shipping Information

• Dimensions - 37" x 47" x 42" / 940 mm. x 1194 mm. x 1067 mm.
• Shipping Details - 554 lbs. / 252 kg.

• RX950B Manual

Note: Manuals listed above are in relation to the most current model. Contact a BendPak technical representative to verify which manual is specific to your product model and/or version.

No Videos Found.